Home>Products>IKO Bearing>0.394 Inch | 10 Millimeter x 0.551 Inch | 14 Millimeter x 0.394 Inch | 10 Millimeter IKO KT101410 Needle Non Thrust Roller Bearings
IKO KT101410 MODELS
Need a CAD or 3D Model?
0.394 Inch | 10 Millimeter x 0.551 Inch | 14 Millimeter x 0.394 Inch | 10 Millimeter IKO KT101410 Needle Non Thrust Roller Bearings
IKO Bearing
IKO KT101410 Bearing SPECIFICATIONS
Manufacturers of all IKO Bearing are represented 0.394 Inch | 10 Millimeter x 0.551 Inch | 14 Millimeter x 0.394 Inch | 10 Millimeter in our partial list of Bearing Argentina, S.A. clients. Contact Gary for a complete 0.394 Inch | 10 Millimeter x 0.551 Inch | 14 Millimeter x 0.394 Inch | 10 Millimeter IKO KT101410 Needle Non Thrust Roller Bearings list of clients and 1.50 mm Fillet Radius ra projects.
- IKO
KT101410
- 11000 rpm
- 1.50 mm
- 25.000 mm
- 9000 rpm
- 35800 N
- 21.00 mm
- 80.0000 mm
- Two Shields
- Bearing Argentina, S.A.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
0.394 Inch | 10 Millimeter x 0.551 Inch | 14 Millimeter x 0.394 Inch | 10 Millimeter IKO KT101410 Needle Non Thrust Roller BearingsTechnical information
- 11000 rpm
- 1.50 mm
- 25.000 mm
- 9000 rpm
- 35800 N
- 21.00 mm
- 80.0000 mm
- Two Shields
- 6400 rpm
- 19300 N
- 0.394 Inch | 10 Millimeter x 0.551 Inch | 14 Millimeter x 0.394 Inch | 10 Millimeter
IKO KT101410 0.394 Inch | 10 Millimeter x 0.551 Inch | 14 Millimeter x 0.394 Inch | 10 Millimeter IKO KT101410 Needle Non Thrust Roller BearingsCross reference
IKO KT101410 bearing Size Chart (mm/inches) | |
---|---|
A | 60 mm |
A1 | 42 mm |
B | 53.7 mm |
d | 57.15 mm |
Dz | 120 mm |
G | R1/8" |
H | 69.9 mm |
H1 | 25 mm |
H2 | 140 mm |
J | 190 mm |
L | 240 mm |
L1 | 71 mm |
N | 18mm |
N1 | 28 mm |
s1 | 26.85 mm |
S | 14.9 mm |
Z | 92.3 mm |
C | 52.5 kN |
C0 | 32.8 kN |
T min. | -40 °C |
T max. | 100 °C |
Weight | 4.82 kg |
Recommended tightening torque for set screw | 16.8 Nm |
Designation of housing | PE212N- |
Designation of bearing | US212-36G2T04 |
Designation of closed end cover | SCC212 |
Designation of open end cover | SCOU212-36 |
IKO KT101410 INTERCHANGE
IKO Bearing Part series KT101410 is a potential replacement for these common bearing part numbers:
KT101410
KT101410
KT101410
KT101410
KT101410
KT101410
KT101410
KT101410
Contact Us
- Bearing Argentina, S.A.
- AddressViamonte 1145-Piso 11-1053 Buenos Aires, Argentina
- Phone(Working Time)372-6258
- Fax
IKO KT101410 Technical Articles
Can a bad wheel bearing cause negative camber? |
How long does it take to do wheel bearings? |
Is clutch release bearing same as Throwout? |
IKO Bearing CATEGORIES
- Vickers Motor Seal
- Vickers Overflow Valve Coil
- Vickers Piston Pump
- Vickers Pressure Switch
- Vickers Proportional Cartridge Valves
- Vickers Proportional Valve Amplifier Board
- Vickers Proportional Valve Coil
- Vickers Six Way Solenoid Valve
- Vickers Small Hydraulic Valve of Pump Truck
- Vickers Superposition Valve
- FAG Bearing
- IKO Bearing
- KOYO Bearing
- NSK Bearing
- NTN Bearing
- AMI Bearing
- AURORA BEARING
- REXROTH Directional spool valves
- REXROTH Valves
- REXROTH Pressure relief valve
- REXROTH Throttle check valves
- REXROTH Check valves
- REXROTH HY-CHECK VALVE
- REXROTH Pressure reducing valve
- REXROTH Directional poppet valves
- REXROTH Throttle valves
- REXROTH Twin throttle check valve
- REXROTH Throttle check valve
- skf 6002 Bearing
- 6203lu Bearing
- r188 ceramic Bearing
- 123 Bearing
Customers Who Viewed IKO KT101410 Bearing Also Viewed
- 1.969 Inch | 50 Millimeter x 2.165 Inch | 55 Millimeter x 0.984 Inch | 25 Millimeter IKO LRT505525 Needle Non Thrust Roller Bearings
- IKO CR32VB Cam Follower and Track Roller - Stud Type
- IKO CF12BUU Cam Follower and Track Roller - Stud Type
- 1.313 Inch | 33.35 Millimeter x 1.625 Inch | 41.275 Millimeter x 0.75 Inch | 19.05 Millimeter IKO BAM2112 Needle Non Thrust Roller Bearings
- IKO CR20 Cam Follower and Track Roller - Stud Type