Home>Products>IKO Bearing>0.394 Inch | 10 Millimeter x 0.591 Inch | 15 Millimeter x 0.807 Inch | 20.5 Millimeter IKO IRT1020-1 Needle Non Thrust Roller Bearings
IKO IRT1020-1 MODELS
Need a CAD or 3D Model?
0.394 Inch | 10 Millimeter x 0.591 Inch | 15 Millimeter x 0.807 Inch | 20.5 Millimeter IKO IRT1020-1 Needle Non Thrust Roller Bearings
IKO Bearing
IKO IRT1020-1 Bearing SPECIFICATIONS
With over 10170 full-service stores, our 0.394 Inch | 10 Millimeter x 0.591 Inch | 15 Millimeter x 0.807 Inch | 20.5 Millimeter IKO IRT1020-1 Needle Non Thrust Roller Bearings inventory Bearing Argentina, S.A. is extensive 0.394 Inch | 10 Millimeter x 0.591 Inch | 15 Millimeter x 0.807 Inch | 20.5 Millimeter and our parts are priced right. within 24 hours. This helps you maximize your productivity by saving time and your hard-earned dollars.
- IKO
IRT1020-1
- G 1/8
- HM 30/900
- MS 30/900-850
- 1030 mm
- 900 mm
- Tr 900x7
- 387 kg
- 10 mm
- Bearing Argentina, S.A.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
0.394 Inch | 10 Millimeter x 0.591 Inch | 15 Millimeter x 0.807 Inch | 20.5 Millimeter IKO IRT1020-1 Needle Non Thrust Roller BearingsTechnical information
- G 1/8
- HM 30/900
- MS 30/900-850
- 1030 mm
- 900 mm
- Tr 900x7
- 387 kg
- 10 mm
- 850 mm
- 100 mm
- 0.394 Inch | 10 Millimeter x 0.591 Inch | 15 Millimeter x 0.807 Inch | 20.5 Millimeter
IKO IRT1020-1 0.394 Inch | 10 Millimeter x 0.591 Inch | 15 Millimeter x 0.807 Inch | 20.5 Millimeter IKO IRT1020-1 Needle Non Thrust Roller BearingsCross reference
IKO IRT1020-1 bearing Size Chart (mm/inches) | |
---|---|
Bearing number | 7036 ACD/HCP4AH1 |
Size (mm) | 280x180x46 |
Bore Diameter (mm) | 280 |
Outer Diameter (mm) | 180 |
Width (mm) | 46 |
d | 180 mm |
D | 280 mm |
B | 46 mm |
d1 | 211.8 mm |
d2 | 211.8 mm |
D1 | 248.2 mm |
K | 0.6 mm |
C1 | 13.4 mm |
r1,2 - min. | 2.1 mm |
r3,4 - min. | 1.1 mm |
a | 76.9 mm |
da - min. | 191 mm |
db - min. | 191 mm |
Da - max. | 269 mm |
Db - max. | 274 mm |
ra - max. | 2 mm |
rb - max. | 1 mm |
dn | 219.7 mm |
Basic dynamic load rating - C | 229 kN |
Basic static load rating - C0 | 275 kN |
Fatigue load limit - Pu | 7.6 kN |
Limiting speed for grease lubrication | 5300 r/min |
Limiting speed for oil lubrication | 8000 mm/min |
Ball - Dw | 30.162 mm |
Ball - z | 21 |
Gref | 111 cm3 |
Calculation factor - e | 0.68 |
Calculation factor - Y2 | 0.87 |
Calculation factor - Y0 | 0.38 |
Calculation factor - X2 | 0.41 |
Calculation factor - Y1 | 0.92 |
Calculation factor - Y2 | 1.41 |
Calculation factor - Y0 | 0.76 |
Calculation factor - X2 | 0.67 |
Preload class A - GA | 1450 N |
Preload class B - GB | 2900 N |
Preload class C - GC | 5800 N |
Preload class D - GD | 11600 N |
Calculation factor - f | 1.13 |
Calculation factor - f1 | 0.99 |
Calculation factor - f2A | 1 |
Calculation factor - f2B | 1.02 |
Calculation factor - f2C | 1.05 |
Calculation factor - f2D | 1.08 |
Calculation factor - fHC | 1.02 |
Preload class A | 506 N/micron |
Preload class B | 658 N/micron |
Preload class C | 868 N/micron |
Preload class D | 1167 N/micron |
d1 | 211.8 mm |
d2 | 211.8 mm |
D1 | 248.2 mm |
C1 | 13.4 mm |
r1,2 min. | 2.1 mm |
r3,4 min. | 1.1 mm |
da min. | 191 mm |
db min. | 191 mm |
Da max. | 269 mm |
Db max. | 274 mm |
ra max. | 2 mm |
rb max. | 1 mm |
dn | 219.7 mm |
Basic dynamic load rating C | 229 kN |
Basic static load rating C0 | 275 kN |
Fatigue load limit Pu | 7.65 kN |
Attainable speed for grease lubrication | 5300 r/min |
Attainable speed for oil-air lubrication | 8000 r/min |
Ball diameter Dw | 30.162 mm |
Number of balls z | 21 |
Reference grease quantity Gref | 111 cm³ |
Preload class A GA | 1450 N |
Static axial stiffness, preload class A | 506 N/µm |
Preload class B GB | 2900 N |
Static axial stiffness, preload class B | 658 N/µm |
Preload class C GC | 5800 N |
Static axial stiffness, preload class C | 868 N/µm |
Preload class D GD | 11600 N |
Static axial stiffness, preload class D | 1167 N/µm |
Calculation factor f | 1.13 |
Calculation factor f1 | 0.99 |
Calculation factor f2A | 1 |
Calculation factor f2B | 1.02 |
Calculation factor f2C | 1.05 |
Calculation factor f2D | 1.08 |
Calculation factor fHC | 1.02 |
Calculation factor e | 0.68 |
Calculation factor (single, tandem) Y2 | 0.87 |
Calculation factor (single, tandem) Y0 | 0.38 |
Calculation factor (single, tandem) X2 | 0.41 |
Calculation factor (back-to-back, face-to-face) Y1 | 0.92 |
Calculation factor (back-to-back, face-to-face) Y2 | 1.41 |
Calculation factor (back-to-back, face-to-face) Y0 | 0.76 |
Calculation factor (back-to-back, face-to-face) X2 | 0.67 |
Mass bearing | 7.69 kg |
IKO IRT1020-1 INTERCHANGE
IKO Bearing Part series IRT1020-1 is a potential replacement for these common bearing part numbers:
IRT1020-1
IRT1020-1
IRT1020-1
IRT1020-1
IRT1020-1
IRT1020-1
IRT1020-1
IRT1020-1
Contact Us
- Bearing Argentina, S.A.
- AddressViamonte 1145-Piso 11-1053 Buenos Aires, Argentina
- Phone(Working Time)372-6258
- Fax
IKO IRT1020-1 Technical Articles
Can a bad wheel bearing cause negative camber? |
How long does it take to do wheel bearings? |
Is clutch release bearing same as Throwout? |
IKO Bearing CATEGORIES
- Vickers Motor Seal
- Vickers Overflow Valve Coil
- Vickers Piston Pump
- Vickers Pressure Switch
- Vickers Proportional Cartridge Valves
- Vickers Proportional Valve Amplifier Board
- Vickers Proportional Valve Coil
- Vickers Six Way Solenoid Valve
- Vickers Small Hydraulic Valve of Pump Truck
- Vickers Superposition Valve
- FAG Bearing
- IKO Bearing
- KOYO Bearing
- NSK Bearing
- NTN Bearing
- AMI Bearing
- AURORA BEARING
- REXROTH Directional spool valves
- REXROTH Valves
- REXROTH Pressure relief valve
- REXROTH Throttle check valves
- REXROTH Check valves
- REXROTH HY-CHECK VALVE
- REXROTH Pressure reducing valve
- REXROTH Directional poppet valves
- REXROTH Throttle valves
- REXROTH Twin throttle check valve
- REXROTH Throttle check valve
- skf 6002 Bearing
- 6203lu Bearing
- r188 ceramic Bearing
- 123 Bearing
Customers Who Viewed IKO IRT1020-1 Bearing Also Viewed
- 1.969 Inch | 50 Millimeter x 2.165 Inch | 55 Millimeter x 0.984 Inch | 25 Millimeter IKO LRT505525 Needle Non Thrust Roller Bearings
- IKO CR32VB Cam Follower and Track Roller - Stud Type
- IKO CF12BUU Cam Follower and Track Roller - Stud Type
- 1.313 Inch | 33.35 Millimeter x 1.625 Inch | 41.275 Millimeter x 0.75 Inch | 19.05 Millimeter IKO BAM2112 Needle Non Thrust Roller Bearings
- IKO CR20 Cam Follower and Track Roller - Stud Type