Home>Products>FAG Bearing>FAG QJ217-MPA-C3 Angular Contact Ball Bearings
FAG QJ217-MPA-C3 MODELS
Need a CAD or 3D Model?
FAG QJ217-MPA-C3 Angular Contact Ball Bearings
category
FAG Bearing
FAG QJ217-MPA-C3 Bearing SPECIFICATIONS
170 Million used FAG QJ217-MPA-C3 Angular Contact Ball Bearings instantly searchable. Shop our large selection 10 mm H of parts based on brand, price, 12 mm B description, and location. Order the FAG Bearing with Bearing Argentina, S.A. stock ...
- FAG
QJ217-MPA-C3
- 12 mm
- 10 mm
- 10 mm
- 12 mm
- 15 mm
- 13
- 12
- 19,844 mm
-
Bearing Argentina, S.A.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
FAG QJ217-MPA-C3 Angular Contact Ball BearingsSponsored products related to this item
- 12 mm
- 10 mm
- 10 mm
- 12 mm
- 15 mm
- 13
- 12
- 19,844 mm
- 33,34 kN
FAG QJ217-MPA-C3 FAG QJ217-MPA-C3 Angular Contact Ball BearingsCustomers who bought this item also bought
FAG QJ217-MPA-C3 bearing Size Chart (mm/inches) | |
---|---|
Engineering Group | Mounted Bearing |
Bearing Number | 22215 |
Shaft Size | 2-1/2 in |
Shaft Size Type | Imperial |
Full Timken Part Number | DVC15K208SB |
Locking Style | Tapered Adapter |
Weight | 18.000 lb |
Housing Style | Piloted Flange Cartridge |
UPC Code | 0883450004329 |
Dimension BC | 6.50 in |
Dimension C | 3.860 in |
Dimension E | 4.60 in |
Dimension F | 7.63 in |
Dimension H | 1.27 in |
Dimension I | 3.11 in |
Dimension J (Bolt Size) | 0.5 in |
Dimension L | 2.75 in |
Dimension M | 1.73 in |
Dimension R | 0.14 in |
Dimension S | 2.87 in |
Dimension G | 5.500 in |
Dimension N | 1.25 in |
C0 - Static Load | 54100 lb |
C - Dynamic Load (Basic) | 49900 lb |
e - Geometry Factor | 0.22 |
Y1 - Geometry Factor | 3.14 |
Y2 - Geometry Factor | 4.67 |
Oil Lubrication - M/N Seal | 1600 rpm |
Oil Lubrication - T Seal | 2900 rpm |
Oil Lubrication - B/C/O Seal | 1300 rpm |
Grease Lubrication - M/N Seal | 1600 rpm |
Grease Lubrication - T Seal | 2400 rpm |
Grease Lubrication - B/C/O Seal | 1300 rpm |
Float | 0.083 in |
Shaft Tolerance | 0.0035 in |
Pre Install Clearance Min | 0.0037 in |
Pre Install Clearance Max | 0.0047 in |
Int Radial Clearance Reduction Min | 0.0015 in |
Int Radial Clearance Reduction Max | 0.0020 in |
Adapter Sleeve Axial Movement Min | 0.022 in |
Adapter Sleeve Axial Movement Max | 0.03 in |
Post Install Int Radial Clearance Min | 0.0017 in |
FAG QJ217-MPA-C3 INTERCHANGE
FAG Bearing Part series QJ217-MPA-C3 is a potential replacement for these common bearing part numbers:
QJ217-MPA-C3
QJ217-MPA-C3
QJ217-MPA-C3
QJ217-MPA-C3
QJ217-MPA-C3
QJ217-MPA-C3
QJ217-MPA-C3
QJ217-MPA-C3
Contact Us

- Bearing Argentina, S.A.
- AddressViamonte 1145-Piso 11-1053 Buenos Aires, Argentina
- Phone(Working Time)372-6258
- Fax
FAG QJ217-MPA-C3 Technical Articles
Can a bad wheel bearing cause negative camber? |
How long does it take to do wheel bearings? |
Is clutch release bearing same as Throwout? |
FAG Bearing CATEGORIES
- Vickers Motor Seal
- Vickers Overflow Valve Coil
- Vickers Piston Pump
- Vickers Pressure Switch
- Vickers Proportional Cartridge Valves
- Vickers Proportional Valve Amplifier Board
- Vickers Proportional Valve Coil
- Vickers Six Way Solenoid Valve
- Vickers Small Hydraulic Valve of Pump Truck
- Vickers Superposition Valve
- FAG Bearing
- IKO Bearing
- KOYO Bearing
- NSK Bearing
- NTN Bearing
- AMI Bearing
- AURORA BEARING
- REXROTH Directional spool valves
- REXROTH Valves
- REXROTH Pressure relief valve
- REXROTH Throttle check valves
- REXROTH Check valves
- REXROTH HY-CHECK VALVE
- REXROTH Pressure reducing valve
- REXROTH Directional poppet valves
- REXROTH Throttle valves
- REXROTH Twin throttle check valve
- REXROTH Throttle check valve
- skf 6002 Bearing
- 6203lu Bearing
- r188 ceramic Bearing
- 123 Bearing